- NEU
-
Marken
- AMD Selected
- Andrew White Guitars
- aNueNue
- Aria
- Aria Pro II
- Aroma Music
- Around Music Instruments
- Big Island Ukulele
- Crossrock
- Contigo
- Galux
- Hluru
- Hiscox Cases
- Just Pro
- Jowoom
- Lirevo
- Lizard Spit
- Loog
- Magadi Kalimba
- Pignose
- Pignose Guitars
- Prodipe Guitars
- Prodipe Audio
- Ritter Bags
- Shape Instruments
- Swiff Audio
- Tiny Bass
- Tomsline by Aroma
- U-Turn
- Vertech
- Instrumente
- Technik
- Zubehör
- Kataloge
- Sale
- Händlerlogin
Filter
–
Prodipe Active monitors 5 inch bi-amplifiedCheck out the Prodipe combined speaker system. If you connect the PRO 10S V3 subwoofer to the Prodipe Pro5 V3 monitors, the combined system will give you studio listening at a remarkably low price.Specifications:
Brand : Prodipe
Amplification : 75W RMS Power HF RMS (peak) : 25W (40W) Power LF RMS (peak) : 50W (90W)
Dimensions : 277(H)×180(W)×245(D) mm
Weight : 5.5 Kgs
Frequency response : 55Hz--22kHz
Frequency : 3KHz
Signal - noise : 82dB/90dB
Tweeter : 1" Neodymium soft dome
Woofer : 5.25'' Fibreglass cone
Input connectors : XLR (3-pins) (Balanced) 1/4" TRS - 10k Ohm (Balanced) RCA - 10k Ohm (Unbalanced)
Adjusting treble : +1dB 0dB -1dB -2dB
Curves:
Prodipe Active monitors 5 inch bi-amplifiedCheck out the Prodipe combined speaker system. If you connect the PRO 10S V3 subwoofer to the Prodipe Pro5 V3 monitors, the combined system will give you studio listening at a remarkably low price.Specifications:
Brand : Prodipe
Amplification : 125W RMS Power HF RMS (peak) : 35W (40W) Power LF RMS (peak) : 30W (90W)
Dimensions : 380 (H) x 260 (W) x 300 (D) mm
Weight : 13Kg
Frequency response : 50Hz--22kHz
Frequency : 2,4KHz
Signal - noise : 86dB/97dB
Tweeter : Neodymium soft dome
Woofer : 8'' Fibreglass cone
Input connectors : XLR (3-pins) (Balanced) 1/4" TRS - 10k Ohm (Balanced) RCA - 10k Ohm (Unbalanced)
Adjusting treble : +1dB 0dB -1dB -2dB
Curves:
Prodipe Subwoofer Pro 10S V3
Check out the Prodipe combined speaker system. If you connect the PRO 10S V3 subwoofer to the Prodipe Pro5 V3 or to the Pro8 V3 monitors, the combined system will give you studio listening at a remarkably low price.> The woofer cones are now in fibreglass. > The neodymium dome tweeters create a sound which is absolutely solid and supremely clear, even above 20KHz. This ensures that the quality of the music is exemplary. > The transducer magnets are shielded by anodised steel covers.> The active filtering has been completely overhauled to ensure that the crossover frequency doesn't suffer from any accidents or bumps.> The casing is made of high density wood to give the sound a high level of consistency and to eliminate any unwanted vibration.> Unlike many of the other manufacturers, we made the decision to put the bass reflex port at the front of the monitors to improve the decompression on the bass response.This makes it much easier to find the best position for each speaker. > There are ample connectors for an all-round use: XLR/TRS 6.35 Jack for a balanced connection, and Cinch (RCA) for an unbalanced connection.
> A compact, elegant design with a well-finished exterior.
Specification:
Amplification : Power RMS (peak) : 150W (270W)
Dimensions : 383(H)×355(W)×398(D) mm
Weight : 18Kg
Frequency response : 36Hz--150kHz
Signal - noise : 98dB
Woofer : 10'' Fibreglass cone
Input connectors : 2 x XLR (3-pins) 2 x 1/4" TRS - 10k Ohm (Balanced) 2 x RCA - 10k Ohm (Unbalanced)
Output connectors : 2 x XLR (3-pins) (Balanced) 2 x RCA - 10k Ohm (Unbalanced)
Phase : 0° 180°
Curves: